Photoshop is a fantastic application for combining average photos to create something entirely new. In this tutorial we will combine several stock photos to create a scenic landscape panorama. Let’s get started!
Tutorial Assets
The following assets were used during the production of this tutorial.
Step 1
The first step is to create a rough composition of the image. Take the stock images from the tutorial assets section of the tutorial and drop them onto your canvas. Use the Move and Free Transform tools to place the images into position and be sure to keep them on independent layers.
Step 2
Select the Girl Stock layer and hit Command/Ctrl + B to adjust the color balance. Use settings for "Midtones" tab and for "Highlights" use the settings as shown below.
Step 3
Now make a mask on the Girl Stock layer by clicking the mask icon in the layers palette. Erase all the unnecessary space around her using a black round brush. Now apply a brightness/contrast adjustment and use the settings shown below.
Step 4
Now apply a Hue/Saturation adjustment using (Command/Ctrl + U) and lower Saturation a bit (-21) – to lower some values of colors on this stock.
Step 5
Now hit the Command/Ctrl + L for “Levels” window and put sliders like these – it will do the job similar to “Brightness/Contrast” in step 3 but it also adds higher highlights on our stock so it creates illusion of light on girl.
Step 6
Then again, go to “Color balance” (Command/Ctrl + B) and select following settings but this time, on our layer “trees” behind girl. For “Midtones” select: 0, + 8, 0.
Step 7
Then go to “Cliff” layer and change the brightness and contrast in “Brightness/Contrast.” After that hit Command/Ctrl + B and change settings like you see here.
Step 8
Drop a fragment of big tree (“laying trees stock”) on your canvas, hit (Command/Ctrl + T) to "Free Transform" this fragment, resize and warp it a bit (right click on this image > "Warp" while being in "Free transform" mode) and change it’s brightness and contrast and saturation to -23.
Also duplicate (Command/Ctrl + J) "Trees" layer behind our model and move it to left side, we will take care of it later. Name it "Left trees".(Red arrow below)
Step 9
Create mask on our "Left trees" layer (Here it’s "Layer 0 copy") and paint stroke with black brush on our mask, to make these layers fade into each other.
Step 10
Select and move this fragment of layer with cliff to fill some space on right side
Step 11
Go back to left side of image and paste "small trees" stock here, resize it (Command/Ctrl + T) and go for Color balance (Command/Ctrl + B) and select settings: and brightness + 73 in "Brightness/Contrast" window. Then do some erasing job around tree so finally it looks like this:
Step 12
Use "Crop Tool" and resize our document, then hit Command/Ctrl + T and resize cliff layer to hide empty space on the top of document. Simply stretch it upwards to make it higher.
Step 13
Erase some unnecessary parts on layer with trees.
Step 14
Paste our "ocean" stock on right side and use following settings for Brightness/Contrast to roughly blend it with our image. Hit Command/Ctrl + B and select values for "Midtones" and for "Highlights".
Step 15
Open up "Liquify filter" (Shift + Ctrl + X) on girl layer and warp her lips upwards, also move her ear upwards to make it look like an Elven ear.
Step 16
Add a mask on layer with cliff and basically erase it in half, then lighten up edges of it by drawing strokes of brown color ("3e1d0a") on new layer with “Linear Dodge (Add)” blending setting, so It will look like this:
Step 17
On layer with girl – select some branches and again hit Command/Ctrl + B (Color Balance) to change color of these. I used values for "Shadows", for "Midtones" and for "Highlights" Then hit Command/Ctrl + U (Hue/Saturation) and select these settings:
Step 18
Another thing here is shadow behind girl – Do it by painting "17120a" color strokes on new layer (“shadow girl”), and then set this layer to "hard light" blending
Step 19
Create new layer and set it’s blending to "Linear Dodge (Add)" and paint some strokes of dark-brown color like "3e1d0a". It will create glowing effect on trees and branches, also you can use "Dodge Tool" on setting "Highlight" to lighten up some areas where light should be visible, like trees edges, cliff edges and some areas on our girl-model stock. Check out image below.
Step 20
Create new layer and draw some strokes on ocean with soft brush, use light color like "d6e4c1" and then, lower the opacity at this layer (about 30%) to create fog effect, create another layer and do the same on trees, then create mask on this layer and erase parts like closer trees or leaves. You can blur this mask (Gaussian Blur) to give it smooth look.
Step 21
Because of blending problems on the top of cliff (overlapping layers and dark areas between the trees) duplicate (Command/Ctrl + J) fragment of trees layer and hit Command/Ctrl + T and flip it horizontally (right click > "Flip horizontal") then move this layer higher than "trees" layer (image 1) so it covers "broken" area (image 2) then start erasing some fragments so finally it turned out like in image 3.
Step 22
Create new layer (blending mode "Linear Dodge (Add)" )and draw some spots of "1b6f71" color, then lower the opacity to about 30%.
Step 23
Use "Clone tool" to cover the tree on left side (on duplicated trees layer) so it won’t look like 100% copy of right side.
Step 24
Also select (using "Lasso tool") and duplicate leaf from trees layer, flip it horizontally and move to right side. Erase some hard highlighted edges. It’s another step in making side left different from side right.
Step 25
Now copy some thin tree fragment from "laying trees stock" and put it like this, on layer "fake tree", then hit Command/Ctrl + B and set values like in image below.
Step 26
Some changes after Brightness/Contrast and Burn tool treatment (Midtones setting).
Step 27
Then erase some edges of this "fake tree" by making mask on its layer and painting some strokes with 80% hard round brush (black). After that lighten up right edge of this tree (since light is coming from right side) and then do some Hue/Saturation changes (Command/Ctrl + U) as below:
Step 28
Duplicate "fake tree" layer, scale it down a bit and rotate like below, then (still in Free Transform mode) right-click on this (well, it’s a branch now) branch and select "Warp" then go to menu on top of Photoshop UI and select "Arch" .
Step 29
Now simply push it to right-down side and bend it like in this image, if you can’t bend it as shown in the image, change the warping orientation by clicking icon on top of Photoshop UI (image below).
Step 30
Light up this branch by going to "Levels" window (Command/Ctrl + L).
Step 31
Duplicate this branch onto new layer and scale it down (Command/Ctrl + T), move it a bit from original position and lower opacity of its layer.
Step 32
Duplicate branch from girl stock and flip it horizontally. Put it on this tree, then erase some parts of this branch to make it look like it’s behind the tree.
Step 33
Then brighten up these branches a bit using “Brightness/Contrast” window, to make them fit background.
Step 34
Use "Lasso Tool" to select one of branches that was standing out a bit, move it to the left.
Step 35
Now smooth jeans material to make it look like normal pants. Do it by painting some strokes with "Smudge Tool" with 4% strength, using soft round brush while stroking. Also cover some parts with "Clone tool" (circled areas).
Step 36
Then open "butterflies stock" and copy some of them to our image, Use "Magic wand tool" to cut out blue areas (roughly), then erase some blue pixels with "Eraser tool". After that, select one of butterflies, rotate and place it (again, Command/Ctrl + T) near shoulder of our girl.
Step 37
Here is how it looks after rotating and placing butterflies. Also cut out each butterfly (select one and hit Command/Ctrl + X) then paste them on separate layers (more comfortable to edit later on) and set each layer to “Linear Dodge (Add)”. Then on layer with butterfly behind her shoulder hit Command/Ctrl + U and select these values to change color of butterfly to more yellow. Do the same for other butterflies or experiment with some values.
Step 38
Then create a new layer and set it to blending mode "Linear Dodge (Add)" and paint some brown ("3e1d0a ") strokes on neck (using soft brush), shoulder and some on butterflies wings, use "Eraser tool" to soften the edges like below.
Step 39
Change brush to hard round, make it smaller (5px) and make some dots with the same color ("3e1d0a") like before, also on new layer (with blending mode "Linear Dodge (Add)"). Do the same around other butterflies.
Step 40
Now copy "birds stock" paste some birds (delete blue areas with "Eraser tool" and "Magic wand tool") hit Command/Ctrl + T, scale them down and place them like below. Also make mask on this layer and with use of black soft big round brush, delete some birds around the center, then lower the opacity of this layer to about 60%.
Step 41
Select and duplicate two birds and scale them up. Put them like below to make it look like they are flying towards screen. Also create mask on this layer and erase some hard edges to make them fade into background.
Step 42
Then paint some strokes of "f1f3ce" color on new layer, on the right side of our image to cover this tree. Again, make mask on this layer and use low opacity big round soft brush (black) to erase this strokes a bit and create something like fog. You can also simply lower the opacity of this layer but I’m used to do masking-thing so I did that in psd file.
Step 43
Here is short process of copying tree from right side and pasting it to left side (on the top of cliff). After that, paste it on tree on the top, to make it look more natural by adding some leaves. Check out images for "Brightness/Contrast" and "Color balance" values.
Step 44
Create new layer with "Color" blending mode and paint some blue strokes to cover light-yellow areas. Sky on right side Is fading to blue so we have to make sky behind trees blue too. Then lower the opacity of this layer (image 2).
Step 45
Go back to girl layer and use "Sponge tool" to lower the value of highlighted areas, like on image 2. Use 50% flow setting on that one. Try to do the same on branches near her legs and on other parts of this stock where light is too orange.
Step 46
Now select "Brush tool" and hit "Q" – you will switch to quick masking mode – your brush will become red, paint some strokes on trees layer like in image 1. Then hit "Q" again and your strokes will convert to selection, hit Shift + Ctrl + I to invert selection. Now hit Command/Ctrl+B and choose values like on image 2 (-21, 0, +34 for "Highlights"). Faraway jungle will become bluer, like the sky behind it.
Step 47
Go to left trees layer and select branches like on image, then hit Command/Ctrl + J to duplicate them onto new layer (“Layer 17″), hit Commad/Ctrl + T and right-click, select "Flip horizontally" then rotate it a bit. It should look like this:
Step 48
After some erasing job it looks like this:
Step 49
Go back to left trees layer and use "Clone stamp tool" to cover branch on the left – like here.
Step 50
Some steps while using "Clone stamp tool".
Step 51
As final step, do add some slight blur treatment to butterflies and "fake tree" to fit them into whole composition, use 0.3 pixels Gaussian blur:
Final Image
{ 0 komentar... read them below or add one }
Posting Komentar